Bambu Lab X2D power consumption
The Bambu Lab X2D draws about 250 W while printing PLA, so an hour of printing uses 0.25 kWh. At $0.18 per kWh that is about $0.045 of electricity an hour. Add printer wear and spare parts, about $0.141 an hour, and the Bambu Lab X2D costs roughly $0.186 an hour to run before filament and your time.
| Electricity price | Electricity | Wear and parts | Total per hour |
|---|---|---|---|
| $0.18/kWh | $0.045 | $0.141 | $0.186 |
| £0.25/kWh | £0.063 | £0.116 | £0.179 |
| €0.30/kWh | €0.075 | €0.132 | €0.207 |
Wear is the Bambu Lab X2D's price spread over about 8,000 print hours, plus nozzles, build plates, belts and fans. Change any of it below.
Price a Bambu Lab X2D print
Suggested price$7.94
You keep after Etsy fees$6.73$2.24 profit on $4.49 cost
2 h 0 min · 50.00 g of filament
| Listing fee | $0.20 |
|---|---|
| Transaction fee | $0.52 |
| Payment processing | $0.49 |
| Total fees | $1.20 |
| Filament | $0.95 |
|---|---|
| Waste | $0.09 |
| Electricity | $0.09 |
| Printer wear and parts | $0.28 |
| Failed-print buffer | $0.07 |
| Your time | $2.50 |
| Packaging | $0.50 |
| Total cost | $4.49 |