Bambu Lab P1S power consumption
The Bambu Lab P1S draws about 105 W while printing PLA, so an hour of printing uses 0.105 kWh. At $0.18 per kWh that is about $0.019 of electricity an hour. Add printer wear and spare parts, about $0.117 an hour, and the Bambu Lab P1S costs roughly $0.135 an hour to run before filament and your time.
| Electricity price | Electricity | Wear and parts | Total per hour |
|---|---|---|---|
| $0.18/kWh | $0.019 | $0.117 | $0.135 |
| £0.25/kWh | £0.026 | £0.092 | £0.119 |
| €0.30/kWh | €0.032 | €0.108 | €0.139 |
Wear is the Bambu Lab P1S's price spread over about 6,000 print hours, plus nozzles, build plates, belts and fans. Change any of it below.
Price a Bambu Lab P1S print
Suggested price$7.76
You keep after Etsy fees$6.57$2.19 profit on $4.38 cost
2 h 0 min · 50.00 g of filament
| Listing fee | $0.20 |
|---|---|
| Transaction fee | $0.50 |
| Payment processing | $0.48 |
| Total fees | $1.19 |
| Filament | $0.95 |
|---|---|
| Waste | $0.09 |
| Electricity | $0.04 |
| Printer wear and parts | $0.23 |
| Failed-print buffer | $0.07 |
| Your time | $2.50 |
| Packaging | $0.50 |
| Total cost | $4.38 |