Bambu Lab A1 power consumption
The Bambu Lab A1 draws about 95 W while printing PLA, so an hour of printing uses 0.095 kWh. At $0.18 per kWh that is about $0.017 of electricity an hour. Add printer wear and spare parts, about $0.110 an hour, and the Bambu Lab A1 costs roughly $0.127 an hour to run before filament and your time.
| Electricity price | Electricity | Wear and parts | Total per hour |
|---|---|---|---|
| $0.18/kWh | $0.017 | $0.110 | $0.127 |
| £0.25/kWh | £0.024 | £0.079 | £0.103 |
| €0.30/kWh | €0.028 | €0.096 | €0.125 |
Wear is the Bambu Lab A1's price spread over about 5,000 print hours, plus nozzles, build plates, belts and fans. Change any of it below.
Price a Bambu Lab A1 print
Suggested price$7.73
You keep after Etsy fees$6.54$2.18 profit on $4.36 cost
2 h 0 min · 50.00 g of filament
| Listing fee | $0.20 |
|---|---|
| Transaction fee | $0.50 |
| Payment processing | $0.48 |
| Total fees | $1.18 |
| Filament | $0.95 |
|---|---|
| Waste | $0.09 |
| Electricity | $0.03 |
| Printer wear and parts | $0.22 |
| Failed-print buffer | $0.06 |
| Your time | $2.50 |
| Packaging | $0.50 |
| Total cost | $4.36 |